
Office
Meeting rooms that switch to private mid-conversation.
SmartFilm
PDLC Switchable Smart Film
Turn existing glass from transparent to private in an instant. Smart film supplied and installed across India.
Drag the divider — left is clear, right is private.
PDLC film contains liquid crystals suspended inside laminated layers.
When electricity is applied, the crystals align.
The glass becomes transparent.
When power is removed, the crystals scatter.
The glass instantly becomes private.
Power off · Glass private
Glass is private.
Crystals begin aligning.
Glass becomes transparent.
Switch instantly whenever required.
One technology.
Unlimited possibilities.

Meeting rooms that switch to private mid-conversation.
Open-plan offices trade privacy for light. Smart film ends the trade: glass-walled cabins and meeting rooms stay transparent for the daylight and the culture, then frost the moment a conversation needs a door.

Hygienic privacy without curtains or blinds.
Cubicle curtains are a known infection-control burden. Switchable glass replaces them with a wipeable, sealed surface: observation when clinicians need it, dignity when patients do.

Bathroom glazing that clears or conceals on demand.
Glass bathrooms make small rooms feel like suites — until the guest wants privacy. Smart film gives every room both, at the touch of a bedside switch. A detail guests remember.

Storefronts that become projection surfaces after hours.
By day, a clear storefront sells what's inside. After close, the same glass frosts into a full-window rear-projection screen — advertising to the street all night.

Confidential when it matters. Transparent when it doesn't.
Board and conference rooms carry the most sensitive conversations in the building. One switch takes the whole glass line private for the duration — and frosted, the same glazing doubles as a projection surface.
Clear to private in under a second — no blinds, no curtains, no waiting.
Blocks the ultraviolet band while daylight keeps passing through.
Cuts solar gain through large glazing, easing the load on cooling.
A flush glass surface — no hardware, tracks or visible mechanisms.
Milliwatts per square metre when switching — near zero at rest.
Laminated construction damps sound between spaces.
Selected installations across offices, hotels and residences in India.


Applied directly onto existing glass — the fastest route to switchable privacy without replacing a single pane.
PDLC bonded between two panes at manufacture — a single switchable unit for facades, partitions and doors.
Switchable lamination follows curved and bent glazing — revolving entrances, pods and radius partitions.
Film and glass cut to drawings — circles, angles and cut-outs around hardware, matched to your schedule.
One team carries your project from first visit to a working installation.
Site walkthrough, glazing review and a clear recommendation — film retrofit or laminated glass.
Every pane measured and templated, including cut-outs and hardware.
Film or laminated units produced to your exact dimensions.
Fitted and wired by our own installation team, with minimal disruption.
Every panel switched, inspected and handed over working.
Everything architects, consultants and contractors need before specifying Smart Film — figures are indicative typical ranges, confirmed per project.
Product overview and indicative specifications — transmission, power, switching, thickness and operating range.
PDF11 KBUpdated
Site survey, film application, wiring and commissioning steps, with a cleaning and troubleshooting reference.
PDF9 KBUpdated
Single-zone wiring diagram, driver and controller notes, power requirements and cable guidance.
PDF9 KBUpdated
Sample warranty summary — typical coverage, exclusions, the claim process and maintenance requirements.
PDF6 KBUpdated
Layered detail drawings for partitions, doors and glazing — for specification and coordination.
In preparation
Available on request — ask our team for early access.
Parametric families with switchable-film parameters, for BIM-based specification and clash detection.
In preparation
Available on request — ask our team for early access.
The details people ask about most, before switching their glass.
Switching is near-instant — the change from private to clear happens in a fraction of a second, the moment power is applied or removed.
Yes. Self-adhesive smart film retrofits onto most existing interior glass — partitions, doors and windows — without removing or replacing the panes.
The film simply returns to its natural frosted state, so your space stays private by default whenever power is off.
A wall switch is the simplest option. Remote controls, timers and integration with building-automation or smart-home systems are also possible.
No — in the private state the glass turns translucent white, like frost. Light still passes through; sight lines don't.
We supply and install across India, for single rooms through to multi-floor fit-outs.
Compare Smart Film with traditional blinds and switchable smart glass over the life of the fit-out, using typical industry rates.
Estimated 10-year saving with Smart Film versus smart glass: ₹4,41,600, about 172 percent return on the Smart Film cost.
Estimated lifetime saving
₹4,41,600
over 10 years vs smart glass
Return
172%
Per year
₹44,200
Payback
Immediate
Indicative assumptions
Estimates for illustration only — not a quotation. Real figures vary with glass type, control system and site. Request an exact quote.